Hur man underhåller en utomhusbubbelpool på vintern?
2025-05-10 15:35● Vattenpumpens ljud ökar: Om vattenpumpen låter onormalt kan det bero på luft i pumpen eller ett hinder i vattenflödet. Rengör filtersystemet, se till att vattnet flyter jämnt och kontrollera om vattenpumpen behöver smörjas eller repareras.● Badkarsvattnet blir grumligt: grumligt vatten orsakas oftast av ineffektiv filterrengöring eller obalanserad kemisk sammansättning i vattnet. Regelbundna vattenbyten och filterrengöring, samt justering av kemikalieförhållandet i vattnet, kan effektivt lösa detta problem.Vilka är fördelarna med att köpa direkt från Lovia Spas fabrik?
När du köper från Lovia Spa (Guangzhou HuanTong Industrial) köper du direkt från en fabrik med över 35 års erfarenhet. Detta innebär bättre priser, anpassade tjänster och snabbare ledtider. Vi erbjuder offerter för bulkbeställningar, OEM/ODM-support och kampanjerbjudanden för distributörer. Alla produkter är av hög kvalitet, certifierade och levereras med garantisupport. Vi strävar efter att vara din långsiktiga spa-leverantör.
Why is it so important to maintain an outdoor whirlpool hot tub in winter?
The maintenance of an outdoor whirlpool hot tub in winter is not only to ensure the normal operation of the equipment, but also to ensure safety and service life. If effective maintenance is not carried out during the sudden drop in winter temperatures, components such as water pipes and pumps may freeze, causing damage to the equipment, and in severe cases, leakage and other problems may occur. Here are a few key reasons to maintain your outdoor whirlpool hot tub in winter:
Prevent freezing damage
When the temperature is low in winter, unheated water may freeze inside the pipes or equipment, causing pipes to expand or even burst, resulting in equipment damage and possible expensive repairs.
Extend equipment life
Regular maintenance and care can effectively extend the life of the outdoor whirlpool hot tub, keep it in good condition and reduce the aging rate of parts.
Ensure safe use
If the outdoor whirlpool hot tub fails to maintain normal operation in winter, users may face safety hazards when using it, such as low water temperature and equipment failure.
What are the steps to maintain an outdoor whirlpool hot tub in winter?
To ensure that the outdoor whirlpool hot tub keeps running well in winter, you need to carry out comprehensive maintenance work from the following aspects.
Regularly check the water temperature and heating system
In the low temperature environment in winter, the temperature of water can easily drop, so it is important to keep the water temperature in the outdoor whirlpool hot tub. Generally speaking, when using an outdoor whirlpool hot tub in winter, the water temperature should be kept between 37℃ and 40℃, which not only ensures a comfortable water temperature, but also prevents water from freezing in the pipes and system. Here are some specific measures:
● Set the constant temperature function: Make sure the bathtub is equipped with an effective constant temperature system. If possible, it is recommended to keep the temperature control system in a moderate temperature range to prevent excessive temperature fluctuations.
● Check the heater regularly: The heater is one of the most critical components in winter maintenance. Check the working status of the heater every once in a while to ensure that it can maintain the water temperature normally. If the outdoor whirlpool hot tub heater is found to be unstable, it should be replaced or repaired in time.
Protect the pipes and pumps of the bathtub
When the temperature is too low in winter, the water pipes and pumps of the outdoor whirlpool hot tub are prone to freezing. If the water in the water pipes freezes, it will cause the pipes to rupture and even damage the internal structure of the pump. To prevent this from happening, you can take the following measures:
● Ensure water circulation: Check the water pump regularly to ensure that the water pump can work properly and circulate water in the pipes. The flow of water can prevent it from freezing under low temperature conditions. Most modern outdoor whirlpool hot tubs are equipped with an automatic circulation system, which can maintain water flow when the tub is not in use.
● Add insulation: Add additional insulation to the tub shell and pipes. Many outdoor whirlpool hot tubs are already equipped with some insulation, but in extremely cold weather, additional insulation can help better maintain temperature and reduce heat loss.
Clean the filter system regularly
The filter is an important part of the outdoor whirlpool hot tub, especially in winter, it is particularly important to keep the filter system clean. If the filter accumulates too much impurities, it will not only reduce water quality, but also may affect the normal circulation of water flow and increase the workload of the heating system. Here are the key steps to maintain the filter in winter:
● Clean or replace the filter regularly: Depending on the frequency of use and water quality, it is recommended to clean the filter every two to four weeks, or replace the filter element as needed.
● Avoid using too many chemicals: While keeping the water clean, do not use too much chemical cleaning agents to avoid chemical deposits in the filtration system and affecting its operating efficiency.
Use a bathtub cover to protect the water temperature
The bathtub cover is especially important in winter. A high-quality insulation cover can not only help reduce heat loss, but also prevent debris such as snow and leaves from entering the bathtub and polluting the water quality. The following are some things to pay attention to when using a bathtub cover:
● Ensure the tightness of the cover: Check whether the bathtub cover is completely sealed. A poorly sealed cover can easily cause heat loss, increase the workload of the heating system, and lead to energy waste and increased usage costs.
● Clean the bathtub cover regularly: Due to the harsh outdoor environment in winter, ice, snow and dirt are easily accumulated on the bathtub cover, so it needs to be cleaned regularly. Before each use, make sure the surface of the cover is clean, so as to prevent impurities from entering the bathtub.
Ensure the water level is appropriate
When maintaining an outdoor whirlpool hot tub in winter, water level control is an aspect that requires special attention. If the water level is too low, it may affect the normal operation of the heater and water pump, and even cause equipment damage. It is usually recommended to keep the water level at a suitable height so that the water flow can circulate smoothly and cover all heating elements. In addition, the water evaporates faster in winter, so the water level should be checked regularly and hot water should be added in time to keep the water level stable.
Drain and replace the water regularly
Despite the cold winter weather, it is still an important step to regularly replace the water in the bathtub to ensure it stays clean and in good working order. The water quality will deteriorate after long-term use and may contain bacteria and impurities. Here are the precautions when replacing the water:
● Choose a mild weather day: If you plan to replace the water in winter, try to choose a relatively warm day to avoid freezing of the pipes during the replacement process. Refill the water with hot water as soon as possible after draining it and start the heating system.
● Thoroughly clean the inner wall of the bathtub: When changing the water, take the opportunity to thoroughly clean the inner wall and pipes of the bathtub to remove accumulated dirt and mineral deposits to prevent them from affecting subsequent use.
Prevent extreme cold weather
In some extremely cold areas, winter temperatures may drop below -20 degrees Celsius. In this case, extra protective measures are particularly important. If you do not plan to use the outdoor whirlpool hot tub for a long time, it is recommended to completely shut down the system and drain the water pipes to prevent water from freezing and damaging the equipment.
● Drain the tub and pipes: First turn off the power, completely drain the water from the outdoor whirlpool hot tub, and make sure all the water in the pipes is also completely drained. If there is still water in the water pipes, it may freeze in low temperature conditions.
● Use antifreeze: In extreme cases, you can also add special antifreeze to the pipes and equipment to avoid pipe rupture. Antifreeze can provide additional protection for the outdoor whirlpool hot tub, but please make sure it is completely removed before using it again.
Common problems and solutions for using outdoor whirlpool hot tubs in winter
During the use and maintenance of outdoor whirlpool hot tubs in winter, you may encounter some common problems. Here are several typical problems and their solutions:
● The water temperature cannot rise: If you find that the water temperature cannot rise, first check whether the heating system and thermostat are operating normally. Secondly, check whether the water level is too low and whether the filter is clogged.
● The water pump noise increases: If the water pump makes abnormal noise, it may be due to air in the pump or water flow obstruction. Clean the filter system, ensure that the water flows smoothly, and check whether the water pump needs lubrication or repair.
● Bathtub water becomes turbid: turbid water is usually caused by ineffective filter cleaning or imbalanced chemical composition in the water. Regular water changes and filter cleaning, and adjusting the ratio of chemicals in the water can effectively solve this problem.
What are the advantages of buying directly from Lovia Spa's factory?
When you buy from Lovia Spa (Guangzhou HuanTong Industrial), you’re sourcing directly from a factory with over 35 years of experience. This means better prices, customized services, and faster lead times. We provide quotes for bulk orders, OEM/ODM support, and promotional deals for distributors. All products are high-quality, certified, and come with warranty support. We’re committed to being your long-term spa supplier.
● Vattentemperaturen kan inte stiga: Om du upptäcker att vattentemperaturen inte kan stiga, kontrollera först om värmesystemet och termostaten fungerar normalt. Kontrollera sedan om vattennivån är för låg och om filtret är igensatt.